Reading/Map Lamp Install

The reading/map lamp in the front cabin area has been installed.
We used a 2 -1/8 inch rotary drill bit to help make the holes where the lamp base was inserted into the bottom of the cabinet.

You can see the fixture turned on here with the halogen lights that came with the lamp.
We weren't that happy with the color that the bulbs gave us along wit the heat that will come with the halogen bulbs.

Here is a photo with the LED bulb on the left side and the yellow-looking halogen on the right side.

And finally here it is with both LED bulbs in it.

PS-Note to self- the fuse for this and the antenna power amp is the third 15A fuse in the fuse box that is on the driver side engine compartment.